Australian custom pools are still, in the main, a hole, a structure and a hydraulic circuit. This hub covers the choice between concrete, fibreglass and vinyl, the sequence of a build, excavation and retaining, plumbing and plant rooms, and infinity or wet-edge work.
Construction
Shells, dirt, steel, wet edges and the plant room that keeps the pretty water honest.
Photo: Jorge Láscar / Wikimedia Commons, CC BY 2.0
Construction
Concrete, fibreglass and vinyl pools compared for Australia
Most Australian custom work is still shotcrete. Fibreglass is a mould and a crane. Vinyl exists, but it is not the default backyard and should not be sold as if it were.
4 March 2026
Construction
What actually happens during a custom pool build
A custom concrete pool is a twelve-to-twenty-week sequence that weather, inspections and unmade owner decisions will stretch. The pretty water is the last thing that happens.
8 February 2026
Construction
Excavation, retaining and structural engineering for custom pools
The hole is the building. Geotech, clay, rock, sand, groundwater and the neighbour’s footings decide the steel — not the pebble sample.
14 January 2026
Construction
Pool plumbing, filtration and plant rooms explained
Pretty water is a circuit. Skimmers, returns, a pump that matches the pipe, and a plant room you can actually service matter more than the pebble.
2 December 2025
Construction
Wet-edge, infinity and vanishing-edge pool construction
A wet edge is a weir, a trough and a tank that must stay level in the wind. Sometimes that is the only honest response to a view. Sometimes it is a suburban vanity with a second pump.
18 November 2025